Latest news

Single shaft for anchoring with steel peg

Fixed single-shaft base for 2 panels in vertical layout (portrait) or 3 panels in horizontal layout (landscape) by anchoring with a standard hot-galvanized steel peg, with a maximum length of 3m, at the desired angle. No geological study is required. Anodising or powder coating option for installations in an alkaline environment.

  • DSC05580B

  • DSC05591

For single-shaft bases, when anchoring to the ground, the maximum peg length can be up to 3m and is anchored to a depth of about 1.70 m.

The steel peg is connected to the aluminium base with M10x85 stainless steel screws and is adjustable in length by 4cm. The aluminium section that hooks onto the steel peg is 30cm and it hooks for 15cm.

An aluminium film or apdm rubber must be placed between the 2 materials to prevent oxidation when the steel contacts the aluminium.

The steel peg is galvanized to 86micra and is type S235 with a cross-section U.

The base dimensions vary according to the layout of the panels, while the standard tilt values are 5-10-15-20-25-28-30 degrees.

The panel-ground distance can be 45-60cm. No special structures can be constructed.

  • TECHNICAL INSTRUCTION - SINGLE-SHAFT BASE FOR ANCHORING WITH STEEL PEG
  • INFORMATION - STEEL PEG CODE A1837

Contact

Sales Department
Tel: +30.22950.98840-2
Fax: +30.22950.98839
E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Factory & Exhibition
42nd km Nat.Road Athinon-Lamias, GR-19011 Avlonas Attica, Greece (map)
E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Newsletter

Subscribe to our newsletter